-
Coulometric Karl-Fischer Titration
Disposable vials can be used to take samples for heating vaporization, which is for standard weight solid or quasi-solid samples, such as: plastic particles, toner, inorganic salts, battery separators, liquid crystals, coatings, food, pharmaceuticals, etc. Working principle: The water in the sample is vaporized through the heater, and the water is carried into the reaction bottle by high-purity nitrogen as the carrier gas to participate in the Karl Fischer reaction, so as to obtain the water co
Send Email Details -
Apparatus for Sulfur Content in LPG
It is used for determining the total volatile sulfur in gaseous hydrocarbons and liquefied petroleum (LP) gases. It is applicable to analysis of natural. processed, and final product materials. Precision has been determined for sulfur in gaseous hydrocarbons in the range of 1mg/kg to 100mg/kg and for sulfur in LP gases in the range of 1mg/kg to 196mg/kg.
Send Email Details -
ASTM D1657 Pressure Hydrometer Cylinder
The density or relative density of light hydrocarbons and liquefied petroleum gases is used in custody transfer quantity calculations or to satisfy transportation, storage, and regulatory requirements.
Send Email Details -
ASTM D1657 Density Or Relative Density Of Light Hydrocarbons
The density or relative density of light hydrocarbons and liquefied petroleum gases is used in custody transfer quantity calculations or to satisfy transportation, storage, and regulatory requirements.
Send Email Details -
ASTM D1838 Copper Strip Corrosion By Liquefied Petroleum (LP) Gases
Copper corrosion limits provide assurance that difficulties will not be experienced in deterioration of the copper and copper-alloy fittings and connections that are commonly used in many types of utilization, storage, and transportation equipment.
Send Email Details -
ASTM D1267 Gage Vapor Pressure Of LPG
Determination of the vapor pressure of liquefied petroleum gas is important for safety reasons to ensure that the maximum operating design pressures of storage, handling, and fuel systems will not be exceeded under normal operating temperature conditions.
Send Email Details -
ASTM D2420 Hydrogen Sulfide In Liquefied Petroleum (LP) Gases
Liquefied petroleum gases and their products of combustion must not be unduly corrosive to the materials with which they come in contact. The potential personnel exposure hazards of H2S also make the detection and measurement of hydrogen sulfide important, even in low concentrations. In addition, in some cases the odor of the gases must not be objectionable
Send Email Details -
ASTM D1142 Dew Point For Gaseous Fuels
Generally, contracts governing the pipeline transmission of natural gas contain specifications limiting the maximum concentration of water vapor allowed. Excess water vapor can cause corrosive conditions,
Send Email Details
