-
Manual Pensky-Martens Closed Cup Flash Point Tester
The flash point temperature is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties which must be considered in assessing the overall flammability hazard of a material
Send Email Details -
Automaitc Pensky-Martens Closed Cup Flash Point Tester
The flash point temperature is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties which must be considered in assessing the overall flammability hazard of a material
Send Email Details -
ASTM D56 Tag Closed Cup Flash Point Tester
this apparatus conforms to ASTM D56 Standard Test Method for Flash Point by Tag Closed Cup Tester, it is used for flash point determinations of liquids with a viscosity of below 5.5 centistokes (cSt) at 104℉ (40℃) or below 9.5cSt at 77℉ (25℃),
Send Email Details -
IP170 Abel Flash Point Tester
This International Standard specifies a method for the determination of the closed cup flash point of petroleum products and other liquids having flash points between -30℃ and 70℃ inclusive.
Send Email Details -
Double Tubes Distillation Apparatus For Petroleum Products
The basic test method of determining the boiling range of a petroleum product by performing a simple batch distillation has been in use as long as the petroleum industry has existed.
Send Email Details -
Automatic Distillation Apparatus For Petroleum Products
KN-86D Automatic Distillation Apparatus for Petroleum Products is a new designed distillation tester. It conforms to standard ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure , which is suitable for testing distillation of light and middle distillates, automotive spark-ignition engine fuels with or without oxygenates, aviation gasoline, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 %, marine fuels, special petroleum spirits, naphthas,
Send Email Details -
ASTM D7345 Automatic Micro Distillation
The distillation (volatility) characteristics of hydrocarbons have an important effect on their safety and performance, especially in the case of fuels and solvents. The boiling range gives information on the composition, the properties, and the behavior of the fuel during storage and use. Volatility is the major determinant of the tendency of a hydrocarbon mixture to produce potentially explosive vapors.
Send Email Details -
ASTM D95 Water In Petroleum Products And Bituminous Materials By Distillation
A knowledge of the water content of petroleum products is important in the refining, purchase, sale, and transfer of products.
Send Email Details -
ASTM E203 Volumetric Karl Fischer Titrator
although the volumetric KF titration can determine low levels of water，it is generally accepted that coumometric KF titrations are more accurate for routine determination of very low levels of water. as a general rule, if samples routinely contain water concentrations of 500Mg/kg or less,the coumometric tech should be considered.
Send Email Details -
Rapid Small Scale Oxidation Stability Tester RSSOT
A 5 mL sample is introduced into a pressure vessel which is then charged with oxygen to 500 kPa at a temperature of 15 to 25°C. The test is initiated by starting the heater and heating the pressure vessel to a temperature of 140°C. The pressure is recorded continuously until the breakpoint is reached. Alternatively, the test may be terminated when a predetermined minimum requirement is reached
Send Email Details -
ASTM D525 Automatic Gasoline Oxidation Stability Tester
The induction period may be used as an indication of the tendency of motor gasoline to form gum in storage. It should be recognized, however, that its correlation with the formation of gum in storage may vary markedly under different storage conditions and with different gasolines
Send Email Details -
ASTM D6371 CFPP Suction Device
KN-6371A CFPP Suction Device conforms to national standard ASTM D6371 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels. It adopts modern advanced technology, mechanical, optical, electronic and computer technology, and can be done automatically test the cold filter plugging point of petroleum products, automatic cold filter plugging point analyzer using optical detection technology, imported compressor refrigeration system ensure the required refrigeration depth. Automatic cold filter plugging point tester reasonable structure, stable performance, simple operation, is the ideal detection equipment.
Send Email Details
