-
ASTM D943 Apparatus for Oxidation Characteristics of Inhibited Mineral Oils
KN-943 Apparatus for Oxidation Characteristics of Inhibited Mineral Oils conforms to ASTM D943 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils. The oil sample is contacted with oxygen in the presence of water and an iron-copper catalyst at 95°C. The test continues until the measured acid number of the oil is 2.0 mg KOH/g or above. The number of test hours required for the oil to reach 2.0 mg KOH/g is the “oxidation lifetime.”
Send Email Details -
ASTM D94 Saponification Number Of Petroleum Products
A known mass of the sample is dissolved in a suitable solvent, such as butanone (methylethylketone), xylenes, or Stoddard Solvent, or a combination thereof (Warning— Extremely flammable. Vapors can cause flash fire), and is heated with a known amount of alcoholic potassium hydroxide (KOH). The excess alkali is titrated with standard acid, and the saponification number is calculated.
Send Email Details -
ASTM D942 Oxidation Stability Of Lubricating Greases
This apparatus measures the change in pressure resulting from consumption of oxygen by oxidation and gain in pressure due to formation of volatile oxidation by products. It predicts neither the stability of greases under dynamic service conditions, nor the stability of greases stored in containers for long periods, nor the stability of films of greases on bearings and motor parts. It should
Send Email Details
