-
ASTM D2809 Apparatus for Cavitation Corrosion and Erosion-Corrosion Characteristics
KN-2809 Apparatus for Cavitation Corrosion and Erosion-Corrosion Characteristics conforms to ASTM D2809 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants. This test method can be used to distinguish between coolants that contribute to cavitation corrosion and erosion-corrosion of aluminum automotive water pumps and those that do not. It is not intended that a particular rating number, as determined from this test, will be equivalent to a certain number of miles in a vehicle test; however, limited correlation between bench and field service tests has been observed with single-phase coolants. Field tests under severe operating conditions should be conducted as the final test if the actual effect of the coolant on cavitation corrosion and erosion-corrosion is to be appraised. It is also possible, with proper control of the test variables, to determine the effect of pump design, materials of construction, and pump operating conditions on cavitation corrosion and erosion-corrosion damage.
Send Email Details -
ASTM D2570 Simulated Service Corrosion Tester
KN-2570 Simulated Service Corrosion Tester conforms to ASTM D2570 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants. An engine coolant is circulated for 1064h at 88℃ (190℉) in a flow loop consisting of a metal reservoir, an automotive coolant pump, an automotive radiator, and the connecting rubber hoses. Test specimens representative of engine cooling system metals are mounted inside the reservoir, which simulates an engine cylinder block. At the end of the test period, the corrosion-inhibiting properties of the coolant are determined by measuring the mass losses of the test specimens and by visual examination of the interior surfaces of the components.
Send Email Details
