ASTM D1264 Water Washout Characteristics Of Lubricating Grease
Brand KN
Product origin Dalian,China
Delivery time deliver as soon as received payment
Supply capacity 30 sets one month
This test method estimates the resistance of greases to water washout from ball bearings under conditions of the test. No correlation with field service has been established.
KN-1264 Water Washout Characteristics Of Lubricating Grease
Overview
KN-1264 Water Washout Characteristics Of Lubricating Grease conforms to the ASTM D1264 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases. This apparatus covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 and 79°C (100 and 175°F) under the prescribed laboratory conditions. It is not to be considered the equivalent of service evaluation tests. Precision and bias was determined using grease ranging from NLGI 3 to 0 grades in the research report
Features
Stainless steel bath with good bearing and SS spray circuit
Imported motor direct drive spindle, silence and stable
Digital tachometer, real time display revolving speed
Flowmeter, two groups of precision needle valve to control the flow rate
Technical parameters
Rated voltage: AC 220V±10% 50Hz or 110V±10% 60Hz
Sink heating power: 500W
Sink temperature range: Room temperature ~ 100℃,continuously adjustable
Control temperature accuracy: ± 1 ℃
Total power: 600 W
Spray water: 5 ± 0.5ml/s.
Bearing speed: 600 ± 30r/min
Ambient requirements: Temperature: 10～40℃；Humidity≤85%
