Automaitc Pensky-Martens Closed Cup Flash Point Tester
Brand KN
Product origin Dalian,China
Delivery time deliver as soon as received payment
Supply capacity 30 sets per month
The flash point temperature is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties which must be considered in assessing the overall flammability hazard of a material
KN-93Z Automatic Pensky-Martens Closed Cup Flash Point Tester
Overview
KN-93Z Automatic Pensky-Martens Closed Cup Flash Point Tester conforms to ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to test for those liquids which have a kinematic viscosity of 5.8mm 2/s (cSt) or more at 37.8℃ or 9.5mm 2/s (cSt) or more at 25℃ (77℉), or that contain suspended solids, or have a tendency to form a surface film while under test. Other classification flash points have been established by these departments for liquids using these test methods.
Features
MCU control, large LCD color touch screen, program heating as ASTM D93 requires
Automatic ignition and judgment of flash point, ignition can be electric or gas supply
Equipped with automatic ignition wire, can automatically ignite the gas
Stepper motor is used for sample stirring, the speed is stable, accurate and adjustable, fully in line with ASTM D93 A,B and C procedure
Quick detection function, the heating rate can be set according to requirements, and the expected flash point of unknown oil sample can be quickly judged.
Automatic lifting and lowering function, easy to operate.
Temperature correction function is equipped, The atmospheric pressure can be automatically corrected
Can set the highest detection temperature, ignition times, reach the set value automatically stop heating.
Nitrogen distinguisher is optional
The tester will disconnect the gas supply when power off
Be able to detect the real-time atmosphere pressure
Technical Parameters
Measurement range: 40 ~ 360℃
Applicable standards: ASTM D93 (A ,B and C procedure)
Temperature detection: platinum resistance (PT100)
Flash point detection: miniature thermocouple
Heating rate: A method 5 ~ 6℃/ min (ASTM D93A)
B method 1 ~ 1.5℃/ min (ASTM D93B)
Heater: 220V, 0.5KW
Stirring speed: 105rpm (ASTM D93A)
250RPM (ASTM D93B)
Ignition mode: optional gas ignition or electric
Working power supply: AC220V±10%, 50Hz
