Manual Pensky-Martens Closed Cup Flash Point Tester
Brand KN
Product origin Dalian,China
Delivery time deliver as soon as received payment
Supply capacity 30 sets one month
The flash point temperature is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties which must be considered in assessing the overall flammability hazard of a material
KN-93 Manual Pensky-Martens Closed-Cup Flash Point Tester
Overview
KN-93 Manual Pensky-Martens Closed-cup Flash Point conforms to the ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to test for those liquids which have a kinematic viscosity of 5.8 mm 2/s (cSt) or more at 37.8°C or 9.5 mm 2/s (cSt) or more at 25°C (77°F), or that contain suspended solids, or have a tendency to form a surface film while under test. Other classification flash points have been established by these departments for liquids using these test methods.
Features
Upper cover with a standard fireball comparer, easy to operate.
Heating with stepless voltage regulator, heating-rate equability.
Stainless steel heater, safe and reliable.
Electrical motor to agitate oil sample makes the temperature of oil sample up equability.
Rational design with attractive appearance and easy operation.
Imported silicone tube
Speed conversion switch
Technical parameters
Rated voltage:AC220V±10% 50Hz
Temperature range:40~300°C
Heating power:0~1000W (Continuously adjustable)
Agitation way: Motor stirrer, 90~120 r/m, 250±10 r/m
Ignition gas: Pipeline coal gas, Liquid gas, and gas pressure less than 10Kpa
Ignition way: Ignition is controlled by hand
Ambient requirement: Temperature: 10~40°C ;Humidity≤85%
