ASTM D8120 Ferrous Debris Quantification Tester

 KN-8120Z Ferrous Debris Quantification Tester

Overview

    KN-8120Z Ferrous Debris Quantification Tester conforms to ASTM D8120 Standard Test Method for Ferrous Debris Quantification. By quantifying the concentration of total ferrous debris, this test method provides a direct indication of wear in the machinery by enabling the user to pinpoint when there is a deviation from the normal buildup of ferrous debris shed by the machinery or when the concentration of ferrous debris has exceeded safe operating limits.

Features

1.   Easy operation of 5-inch touch screen and good visibility display

2.   Good repeatability, fast measurement result confirmation (measurement time 2sec)

3.   Possible to measure with oil of 2ml sample amount (grease can be measured with the same container)

4.   After testing, you can check the trend with the result value

5.   Easy portability in the field with a sturdy bag

6.   Measurement conforming to ASTM D8120 standard

Technical parameters

1.  Power: AC110~240V, 50/60Hz

2.  Measuring range: 0~5500mg/L(ppm)

3.  Measurement temperature range: 0~50℃

4.  Display: 5 inch touch screen, 1280*720

5.  Interface type: USB method

6.  Sample amount: 2ml

7.  Repeatability＜2sec

8.  Test sensitivity: 1mg/L

9.  Memory: 32G

10.   Battery capacity: 3400mAh (within 5hr after full charge)

11.   Dimension: 250*218*133mm

12.   Weight: 2.7kg

Application

1.  Oil analysis

2.  Rotating machinery (pumps, reducers, bearings, etc.)

3.  Hydraulic facility

4.  Engine and transmission

5.  Wind generator

6.  Mobile equipment and vehicles

7.  Military equipment

8.  Durability tester

9.  Other tribological friction equipment